Large Scale Lithium Discovery Confirmed In Nevada
Released
Released
Announcement PDF
4 August 2023
ASX ANNOUNCEMENT
TWO +170m THICK LITHIUM CLAYSTONE HITS
CONFIRM ENORMOUS SCALE OF NEVADA LITHIUM
PROJECT
Highlights
•
Exceptional assay results have confirmed the presence of shallow and thick lithium bearing
claystone at the Lone Mountain Prospect within the Nevada Lithium Project (80%), including:
▪
179.8m @ 766ppm Li from 39.6m (WF23-015)
•
▪
Including 19.8m @ 1,010ppm from 80.8m
170.7m @ 764ppm Li from 67.1m to end of hole (WF23-014)
•
Including 27.4m 1,030ppm Li from 112.8m
▪
44.2m @ 542ppm Li from 114.3m (WF23-013) and
▪
22.9m @ 652ppm Li from 163.1m (WF23-013)
•
Drilling to date demonstrates the huge scale of the lithium (Li) mineralisation and which
remains open.
•
The Li mineralisation is hosted in the same geological unit which hosts neighbouring American
Lithium’s TLC Deposit (TSX: LI) and American Battery Technology Corporation (OTC: ABML).
•
The results validate the significance of the initial discovery and highlights a mineralised
footprint currently at 3km by 1.3km with a further 2km of prospective strike open to the south.
•
Importantly, the depth to higher-grade mineralisation (>1,000ppm Li) has been confirmed
shallowing towards the surface on a southerly projection.
•
The consistency of thickness and Li grade provides confidence to move towards resource
definition drilling, which is scheduled to commence in September 2023.
•
The follow up Phase 3 drilling programme will also collect samples for initial metallurgical test
work and test the remaining regional prospects at San Antonne and Traction.
•
A maiden Mineral Resource Estimate (MRE) is targeted to be completed in Q1 2024.
•
Lone Mountain is located near the mining hub of Tonopah in the US State of Nevada, which is
a premier global mining district and home to other advanced lithium claystone projects such
as Rhyolite Ridge (ASX: INR), TLC (TSX: LI), and Thacker Pass (TSX: LAC) which is currently
under development.
Future Battery Minerals Limited (ASX: FBM) (FBM or the Company) is pleased to announce exceptional
assay results from the Phase 2 reverse circulation (RC) drilling programme at the Nevada Lithium
Project (NLP), located near Tonopah in Nevada, USA (Future Battery Minerals 80%).
Future Battery Minerals Ltd
info@futurebatteryminerals.com.au
Suite 10, 38 Colin St, West Perth WA 6005
+61 8 6383 7817
ABN 91 148 966 545
futurebatteryminerals.com.au
ASX: FBM
Follow Us
1
The Phase 2 programme assay results highlight the scale of the discovery at the NLP. Combining the
mineralisation also intercepted in the Phase 1 programme, the mineralised strike length now extends some
3km east-west and 1.3km north-south and which remains open for a further 2km to the south.
Downhole thicknesses of up to 179.8m (WF23-015) are now confirmed to be shallowing to the south,
including higher-grade (>1,000ppm) mineralisation. The Phase 1 significant results included:
▪
109.7m @ 766ppm Li from 135.6m depth to end of hole, including 29m @ 1,010ppm Li
from a depth of 210.3m (WF23-011)1
The Company is currently in the process of planning and obtaining permit for the Phase 3 drilling programme
at the NLP. The drilling programme is aiming to infill and extend the current mineralised trend in the NLP. The
drilling is scheduled to commence in September 2023, consisting of both RC and diamond core drilling
(DD), with drill hole spacing planned to achieve a Maiden Mineral Resource Estimate (MRE) in the
March 2024 quarter. The DD will also collect samples for early-stage metallurgical test work.
The Company will be exploring the opportunity for US Federal Grants to support funding of the on-going
metallurgical test work. There are currently US Department of Defence funding grants available for application,
which encourage the advancement and investigation of the viability of critical mineral projects in the United
States of America (USA). Furthermore, post releasing a pre-feasibility study (PFS), there are also favourable
loans available to eligible Companies from the USA Department of Energy to fund the development of USA
located critical mineral projects.
FBM Technical Director Robin Cox commented:
“The assay results from the second round of drilling confirm the outstanding thick intercepts of lithium
mineralised claystone, highlighting the significance of the discovery at the NLP. Importantly, the Li
intercepts are shallowing to the south with mineralisation now identified at less than 40m down hole
and up to 180m in down hole thickness. The significance of the scale is highlighted by the current
mineralised east-west strike of 3km and north-south strike of 1.3km, which still remains open to the
south for a further 2km. The Company is looking forward to recommencing drilling with the aim of
defining a Maiden Mineral Resource (MRE) in the March 2024 quarter”.
Discussion of Drilling Results
The Phase 2 programme was aimed at extending the known Lithium (Li) claystone horizon intercepted during
the Phase 1 programme in drill hole WF23-011 at the Western Flats Prospect, consisting of 109.7m @ 766ppm
Li from a down-hole depth of 135m which remained open in multiple directions. During the Phase 1
programme, a total of six (6) holes were drilled within the Western Flats Prospect, which is adjacent to the
Lone Mountain claims group area. The focus of the Phase 1 programme was to test the prospectivity of Siebert
Formation which host the Li bearing claystone unit.
The Phase 2 drilling programme successfully intercepted thick and shallow Li mineralisation with
results including:
▪
179.8m @ 766ppm from 39.6m (WF23-015)
•
▪
170.7m @ 764ppm Li from 67.1m to end of hole (WF23-014)
•
▪
Including 19.8m @ 1,010ppm from 80.8m
Including 27.4m 1,030ppm Li from 112.8m
44.2m @ 542ppm from 114.3m (WF23-013) and
22.9m @ 652ppm from 163.1m (WF23-013)
1
Refer to 13 April 2023 ASX Announcement - HIGH GRADE LITHIUM CLAYSTONE DISCOVERED IN NEVADA
Future Battery Minerals Ltd
info@futurebatteryminerals.com.au
Suite 10, 38 Colin St, West Perth WA 6005
+61 8 6383 7817
ABN 91 148 966 545
futurebatteryminerals.com.au
ASX: FBM
Follow Us
2
This represents a strike length of 3.km in the east-west. Importantly field mapping of the Lone Mountain
Prospect has identified a further 2km strike potential to the south, where it is anticipated that
mineralisation will continue and become shallower. The southern extension will be the focus of further
drilling in the upcoming Phase 3 RC and DD programme.
Based on the current drilling results and the flat lying continuous nature of these lacustrine deposits,
the Company now has the confidence to advance towards resource drilling and early-stage
metallurgical test work. This is scheduled to commence in September 2023 following the finalisation of drill
permits and availability of drilling contractors. The programme will consist of both wide spaced RC and diamond
core drilling (DD). The diamond core will be utilised to collect structural data and to determine any grade
variance between RC and core sampling techniques. The diamond core will also be utilised in the on-going
metallurgical test work.
Following the completion of the Phase 3 programme, the Company will initiate a Maiden Mineral
Resource Estimate (MRE) of the Lone Mountain Prospect. The MRE is scheduled to be completed in
the March 2024 quarter. The Western Flats and Lone Mountain Prospect area is adjacent to the TLC deposit
of American Lithium Corp’s (TSXV: LI), which holds NI43-101 Measured and Indicated Resources of 2,052Mt
@ 809ppm Li for 8.83Mt Li carbonate equivalent (LCE) contained. Furthermore, the Company’s prospects are
also adjacent to the Tonopah Flats deposit of American Battery Technology Company’ (ABTC) (OTCQX: ABM)
contains S-K1300 Inferred resources of 5,289Mt @ 561ppm Li for 15.8Mt LCE contained.
The Phase 2 drilling programme also tested the Heller Prospect with three holes completed for over 300m.
The drilling failed to intercept lithologies prospective for Li mineralisation. The Heller Prospect is considered to
be adequately tested and no further or follow up work is planned at Heller. The Company will now focus
exploration activities on the Lone Mountain Prospect and the untested regional prospects at San
Antone and Traction which will be systematically tested throughout the remainder of 2023.
Future Battery Minerals Ltd
info@futurebatteryminerals.com.au
Suite 10, 38 Colin St, West Perth WA 6005
+61 8 6383 7817
ABN 91 148 966 545
futurebatteryminerals.com.au
ASX: FBM
Follow Us
3
Figure 1: NLP - Drill Hole Locations at Western Flats and Lone Mountain
Future Battery Minerals Ltd
info@futurebatteryminerals.com.au
Suite 10, 38 Colin St, West Perth WA 6005
+61 8 6383 7817
ABN 91 148 966 545
futurebatteryminerals.com.au
ASX: FBM
Follow Us
4
Figure 2: NLP Prospects - RC drill hole Locations at Western Flats, Lone Mountain and Heller
Future Battery Minerals Ltd
info@futurebatteryminerals.com.au
Suite 10, 38 Colin St, West Perth WA 6005
+61 8 6383 7817
ABN 91 148 966 545
futurebatteryminerals.com.au
ASX: FBM
Follow Us
5
Figure 3: Schematic Cross Section 4218530N- RC drill hole’s WF23-013-WF23-015
About the Nevada Lithium Project (NLP) – 80%
The 80% owned Nevada Lithium Project (NLP) consists of five (5) key prospects, Traction, San Antone, Heller,
Lone Mountain and Western Flats comprising >90km2 of ground that is considered highly prospective for larger
sedimentary-hosted lithium deposits.
The region is home to several large sedimentary-hosted lithium deposits including Ioneer Resources’ (ASX:
INR) Rhyolite Ridge and American Lithium Corporation’s (TSX.V: LI) (US OTC: LIACF) (Frankfurt: 5LA1) TLC
Lithium Project. Albemarle Corporation’s (NYSE: ALB) Silver Peak Lithium Mine, currently the only producing
lithium mine in North America, lies approximately 45 km to the west of the NLP.
The Company completed its Phase 1 maiden 2,900m reverse circulation (RC) drilling programme in March
2023, which successfully discovered Lithium (Li) bearing claystone lithologies of the Siebert Formation
highlighted by the intercept of 109.7m @ 766ppm Li from 135.6m WF23-011. Significantly, thick high-grade
Li–claystone was intersected in three additional drill holes at Western Flats Prospect. The Company is
currently advancing the projects under a permit referred to as a Notice of Intent (NOI).
The Phase 2 drilling programme in July 2023 successfully intercepted thick and shallow Li mineralisation with
results including:
▪
179.8m @ 766ppm from 39.6m (WF23-015)
•
▪
Including 19.8m @ 1,010ppm from 80.8m
170.7m @ 764ppm Li from 67.1m to end of hole (WF23-014)
•
Including 27.4m 1,030ppm Li from 112.8m
The Company is systematically testing four (4) of the five (5) NLP prospects, after deciding to cease further
exploration at the Heller Prospect.
Future Battery Minerals Ltd
info@futurebatteryminerals.com.au
Suite 10, 38 Colin St, West Perth WA 6005
+61 8 6383 7817
ABN 91 148 966 545
futurebatteryminerals.com.au
ASX: FBM
Follow Us
6
This announcement has been authorised for release by the Board of Directors of the Company.
-ENDFor further information visit www.futurebatteryminerals.com or contact:
Robin Cox
Technical Director
E: rcox@futurebatteryminerals.com
Mike Edwards
Executive Chairman
E: mike.edwards@futurebatteryminerals.com
Competent Persons Statement
The information in this announcement that relates to exploration results is based on and fairly represents information
compiled by Mr Robin Cox BSc (E.Geol), a Competent Person, who is a Member of the Australian Institute of Mining and
Metallurgy. Mr Cox is the Company’s Chief Geologist and has sufficient experience that is relevant to the style of
mineralisation and type of deposit under consideration and to the activity being undertaken to qualify as a Competent
Person as defined in the 2012 Edition of the Australasian Code for Reporting of Exploration Results, Mineral Resources
and Ore Reserves. Mr Cox consents to the inclusion in this announcement of the matters based on his information in the
form and context in which it appears.
Forward-Looking Statements
This document may include forward-looking statements. Forward-looking statements include, but are not limited to,
statements concerning Future Battery Minerals Limited’s planned exploration program and other statements that are not
historical facts. When used in this document, the words such as "could," "plan," "estimate," "expect," "intend," "may”,
"potential", "should," and similar expressions are forward-looking statements. Although Future Battery Minerals Limited
believes that its expectations reflected in these forward-looking statements are reasonable, such statements involve risks
and uncertainties and no assurance can be given that actual results will be consistent with these forward-looking
statements.
Previously Reported Results
There is information in this announcement relating to exploration results which were previously announced on 13 April
2023. Other than those disclosed in the announcement, the Company confirms that it is not aware of any new information
or data that materially affects the information included in the original market announcement.
Future Battery Minerals Ltd
info@futurebatteryminerals.com.au
Suite 10, 38 Colin St, West Perth WA 6005
+61 8 6383 7817
ABN 91 148 966 545
futurebatteryminerals.com.au
ASX: FBM
Follow Us
7
Figure 4 - NLP - Prospect location map
Future Battery Minerals Ltd
info@futurebatteryminerals.com.au
Suite 10, 38 Colin St, West Perth WA 6005
+61 8 6383 7817
ABN 91 148 966 545
futurebatteryminerals.com.au
ASX: FBM
Follow Us
8
Table 1 – Table of Significant Intercepts >300ppm Li (Maximum 3m internal waste)
Hole ID
Depth from
(m)
Depth to
(m)
Interval
(m)
Li (ppm)
WF23-012
--
WF23-013
114.3
158.5
44.2
542
WF23-013
163.1
186
22.9
652
WF23-014
67.1
237.8
170.7
764
WF23-015
39.6
219.4
179.8
766
NSI
WF23-016
NSI
WF23-017
NSI
WF23-018
NSI
H23-001
NSI
H23-002
NSI
H23-003
NSI
Significant Intercept and Geological
Comment
Hole abandoned due to gravel cave in,
redrilled with WF23-018
44.2m @ 542ppm Li from 114.3m
22.9m @ 652ppm Li from 163.1m
Including 4.6m @ 1270ppm Li from 176.8m
170.7m @ 764ppm Li from 67.1m
Including 27.4m 1,030ppm Li from 112.8m
179.8m @ 766ppm from 39.6m
Including 19.8m @ 1,010ppm from 80.8m
Volcanics/basement intercepted under
transported gravel cover – Non Li Bearing
Volcanics/basement intercepted under
transported gravel cover
Seibert intercepted at 118.9m down hole –
Hole abandoned due to conditions– Redrilling required.
Hole intercepted andesite and tuffaceous
sediments – Non Li bearing
Hole intercepted andesite and tuffaceous
sediments – Non Li bearing
Hole intercepted andesite and tuffaceous
sediments – Non Li bearing
Table 2 - Drill hole location table, RC drilling at Nevada Li Project, project NAD 83 UTM Zone 11N
Hole ID
EASTING
(m)
NORTHING
(m)
RL (m)
WF23-012
WF23-013
WF23-014
WF23-015
WF23-016
WF23-017
WF23-018
H23-001
H23-002
H23-003
462633
462425
463792
463120
461848
461317
462642
487244
485449
484975
4219352
4218485
4218482
4218565
4219927
4220278
4219353
4202932
4201967
4201244
1490
1490
1490
1490
1490
1490
1490
1490
1490
1490
Max
Depth
(m)
85.3
213.4
237.7
243.8
73.2
79.2
195.1
79.2
121.9
105.2
Future Battery Minerals Ltd
info@futurebatteryminerals.com.au
Suite 10, 38 Colin St, West Perth WA 6005
+61 8 6383 7817
ABN 91 148 966 545
futurebatteryminerals.com.au
Dip
(degrees)
Azimuth
(degrees)
-90
-90
-90
-90
-90
-90
-90
-90
-90
-90
0
0
0
0
0
0
0
0
0
0
ASX: FBM
Follow Us
9
JORC Code, 2012 Edition, Table 1
Section 1: Sampling Techniques and Data
CRITERIA
Sampling
techniques
EXPLANATION
COMMENTARY
●
Nature and quality of sampling (eg cut
channels, random chips, or specific
specialised industry standard
measurement tools appropriate to the
minerals under investigation, such as
down hole gamma sondes, or handheld
XRF instruments, etc). These examples
should not be taken as limiting the broad
meaning of sampling.
Include reference to measures taken to
ensure sample representivity and the
appropriate calibration of any
measurement tools or systems used.
Aspects of the determination of
mineralisation that are Material to the
Public Report. In cases where ‘industry
standard’ work has been done this would
be relatively simple (eg ‘reverse circulation
drilling was used to obtain 1m samples
from which 3kg was pulverised to produce
a 30g charge for fire assay’). In other
cases more explanation may be required,
such as where there is coarse gold that
has inherent sampling problems. Unusual
commodities or mineralisation types (eg
submarine nodules) may warrant
disclosure of detailed information.
Soil Samples
● At each prospect, soil samples were taken
at all claim corners, on approximately 183
x 457 m rectangular grid.
● At each site the sampling crew collected
~0.5 kg samples from the bottom of the B
horizon, at 20 - 25 cm depth. Samples
were coarsely (~5 mm) screened in the
field, and then placed into 5" x 7"
polyethylene bags for transport and
delivery to the assay lab.
● No duplicates at this time.
Rock Chip Samples
At the Traction & Lone Mountain properties
soil anomalies sites were visited by NV
Resources geologists in November 2021 &
January 2022
•
Outcrops were chip sampled along ~1-2
m channels – with efforts made to crosscut bedding at the steepest possible
angle.
•
Where only subcrop was present,
representative samples were gathered
across ~1-2 m2 areas.
•
Samples were placed in 7" x 12.5" polycotton bags for transport and delivery to
the assay lab.
•
No duplicates at this time.
RC Drilling Samples
•
RC drill Samples create a 1.5m down
hole sample; and
•
Sample weights range between 3-5kg
Method of recording and assessing core
and chip sample recoveries and results
assessed.
Measures taken to maximise sample
recovery and ensure representative nature
of the samples.
Whether a relationship exists between
sample recovery and grade and whether
sample bias may have occurred due to
preferential loss/gain of fine/coarse
material.
Whether core and chip samples have
been geologically and geotechnically
logged to a level of detail to support
appropriate Mineral Resource estimation,
mining studies and metallurgical studies.
Whether logging is qualitative or
quantitative in nature. Core (or costean,
channel, etc) photography.
The total length and percentage of the
relevant intersections logged.
RC Drilling.
•
Sample recovery is noted in the field for
each individual sample and weighed at
the laboratory during sample preparation.
Sample is collected via a cyclone and
splitter attached to the drill rig, which is
considered standard for RC sampling.
•
No relationship between sample recovery
and grade has been yet observed and no
sample bias is believed to have occurred.
●
●
Drill sample
recovery
●
●
●
Logging
●
●
●
Future Battery Minerals Limited (FBM):
•
Drill chips are lithologically logged by
Geologists in the field;
•
Logging is qualitative, recording rock type
and mineral abundance; and
•
Logging of RC chips is conducted on a
1.5 metre sample size.
Future Battery Minerals Ltd
info@futurebatteryminerals.com.au
Suite 10, 38 Colin St, West Perth WA 6005
+61 8 6383 7817
ABN 91 148 966 545
futurebatteryminerals.com.au
ASX: FBM
Follow Us
10
CRITERIA
Sub-sampling
techniques and
sample
preparation
EXPLANATION
COMMENTARY
●
Soil Samples -:
•
Dry samples.
•
Soils in this semi-arid to arid region
are sandy; 0.5 kg samples should
capture a representative range of soil
at all sites.
•
The sampling protocol conformed to
standard practice in the region.
•
ALS Minerals, prep package PREP-41
was used for all soils submittals.
Rock Chip Samples -:
•
Dry samples.
•
~1-2 kg average sample weight.
•
Sampling protocol & QC as described
above. Sampling technique was
optimized to obtain representative
samples of very weakly indurated
claystone, ash tuffs, & compacted finegrained siliciclastic sediments.
•
ALS Minerals, prep package PREP-31
was used for all rock chip submittals.
RC Chip Samples
● 1.5m RC percussion, sample is split via a
cyclone and splitter attached to the drill rig
to produce a bagged 3-5kg sample.
● Certified reference material and blank
material are inserted every 20 samples as
per company QA/QC procedure for RC.
● Field duplicates collected from the
Cyclone and cone splitter are inserted
every 60 samples
● No further sub sampling has been
conducted
● Certified reference material is inserted
every 20 samples as per the company
QA/QC procedure.
● ALS Minerals, multi element analysis
method ME-MS63 utilised for all samples,
consisting of 4-acid digestion with ICP-MS
and ICP-AES analysis.
● No duplicates or blanks were submitted in
the sampling procedure.
● QC Laboratory Blanks and Standards
were inserted at a ratio 1:10.
●
●
●
●
Quality of assay
data and
laboratory tests
●
●
●
Verification of
sampling and
assaying
●
●
●
●
If non-core, whether riffled, tube sampled,
rotary split, etc and whether sampled wet
or dry.
For all sample types, the nature, quality
and appropriateness of the sample
preparation technique.
Quality control procedures adopted for all
sub-sampling stages to maximise
representivity of samples.
Measures taken to ensure that the
sampling is representative of the in-situ
material collected, including for instance
results for field duplicate/second-half
sampling.
Whether sample sizes are appropriate to
the grain size of the material being
sampled.
The nature, quality and appropriateness of
the assaying and laboratory procedures
used and whether the technique is
considered partial or total.
For geophysical tools, spectrometers,
handheld XRF instruments, etc, the
parameters used in determining the
analysis including instrument make and
model, reading times, calibrations factors
applied and their derivation, etc.
Nature of quality control procedures
adopted (eg standards, blanks, duplicates,
external laboratory checks) and whether
acceptable levels of accuracy (i.e. lack of
bias) and precision have been established.
The verification of significant intersections
by either independent or alternative
company personnel.
The use of twinned holes.
Documentation of primary data, data entry
procedures, data verification, data storage
(physical and electronic) protocols.
Discuss any adjustment to assay data.
•
•
•
A CP conducted a site visit of the
anomalous (>500ppm Li) soil samples
and rock chip samples to verify that
claystone is present. Mineralisation is not
visible in hand sample.
Samples have not been duplicated.
All primary paper data is held at NV
Resources office; digitised data is backed
up onto an online cloud storage
Future Battery Minerals Ltd
info@futurebatteryminerals.com.au
Suite 10, 38 Colin St, West Perth WA 6005
+61 8 6383 7817
ABN 91 148 966 545
futurebatteryminerals.com.au
ASX: FBM
Follow Us
11
CRITERIA
EXPLANATION
COMMENTARY
•
Location of data
points
●
●
●
Data spacing and
distribution
●
●
●
Orientation of
data in relation to
geological
structure
Sample security
●
●
●
Accuracy and quality of surveys used to
locate drill-holes (collar and down-hole
surveys), trenches, mine workings and
other locations used in Mineral Resource
estimation.
Specification of the grid system used.
Quality and adequacy of topographic
control.
•
Data spacing for reporting of Exploration
Results.
Whether the data spacing and distribution
is sufficient to establish the degree of
geological and grade continuity
appropriate for the Mineral Resource and
Ore Reserve estimation procedure(s) and
classifications applied.
Whether sample compositing has been
applied.
●
Whether the orientation of sampling
achieves unbiased sampling of possible
structures and the extent to which this is
known, considering the deposit type.
If the relationship between the drilling
orientation and the orientation of key
mineralised structures is considered to
have introduced a sampling bias, this
should be assessed and reported if
material.
•
The measures taken to ensure sample
security.
•
•
•
●
●
•
•
•
•
Audits or reviews
●
The results of any audits or reviews of
sampling techniques and data.
●
(Dropbox).
No adjustments to assays have occurred.
Soil samples were surveyed in UTM
coordinates, NAD83 UTM zone 11N datum,
by handheld GPS
Rock chip samples were surveyed in UTM
coordinates, NAD83 UTM zone 11N datum,
by handheld GPS
Drill collars were surveyed in UTM
coordinates, NAD83 UTM zone 11N datum,
by handheld GPS
Soil sample spacing is sufficient to
establish lithium anomaly clustering & to
delineate sites for more advanced
exploration
Rock chip sampling has supported soils
lithium anomaly results at Traction & Lone
Mountain prospects
Drill Holes were designed with
consideration to accessibility and to test
stratigraphy across select portions of the
prospects. Drilling was not at this stage
designed for resource estimation
purposes.
Soils: Structural controls were not
delineated by surface grid sampling
Rock chips: rock chip sampling targeted
assessment of favourable stratigraphy &
confirmation of soils grid results.
Structural framework has not been
addressed in surface sampling.
Drill Holes: Stratigraphic units are
considered to be relatively flat laying
hence drilling has been conducted
vertically.
Soils: soil samples were kept in bags on
the back of the samplers truck until
delivery to the transportation and/or
laboratory facility.
Rock chips: samples were kept locked in
consultant geologist’s truck from time of
sampling to delivery at ALS assay lab in
Reno, NV
Drill Holes: Samples collected in marked
calico bags and immediately stored in
sealed bulka bags for transport to ALS
assay Lab in Reno NV post drill hole.
No independent audit or review has been
undertaken.
Future Battery Minerals Ltd
info@futurebatteryminerals.com.au
Suite 10, 38 Colin St, West Perth WA 6005
+61 8 6383 7817
ABN 91 148 966 545
futurebatteryminerals.com.au
ASX: FBM
Follow Us
12
Section 2: Reporting of Exploration Results
CRITERIA
Mineral tenement
and land tenure
status
EXPLANATION
COMMENTARY
●
FBM owns 80% of the Nevada Lithium
Project (NLP). All mining claims are filed as
BLM claims. The Project is made up of the
following unpatented BLM mining claims:
● Heller Prospect consists of 82 filed lode
claims
● Lone Mountain Prospect consists of
242 filed lode claims
● San Antone Prospect consists of 243
filed lode claims
● Traction Prospect consists of 204 filed
lode claims
● There are no known issues with regard
to access or environment.
● The lode claims are in good standing
and no known encumbrances exist.
● Western Flats consists of 253 filed lode
claims
● At all four prospects, previous work has
been conducted by NV Resources and
its consultants, being the vendors of the
NLP to FBM.
● Data collected by this entity has been
reviewed in detail by FBM.
● The Heller, Lone Mountain, San
Antone, Western Flats and Traction
Prospects are considered prospective
for lithium clay mineralisation.
● Lithium anomalism/mineralisation is
hosted in weakly indurated Tertiary
lacustrine claystone & ashfall units, in
the Basin and Range Province of
Nevada, USA
● Relevant historical drill-hole information
is included in this announcement
however data is limited.
● All location data from FBM recently
completed drilling has been provided in
Table 1.
●
Exploration done
by other parties
Geology
Drill-hole
Information
●
Acknowledgment and appraisal of
exploration by other parties.
●
Deposit type, geological setting and style
of mineralisation.
●
A summary of all information material to
the understanding of the exploration
results including a tabulation of the
following information for all Material drillholes:
● easting and northing of the drill-hole
collar
● elevation or RL (Reduced Level –
elevation above sea level in metres)
of the drill-hole collar
● dip and azimuth of the hole
● down hole length and interception
depth
● hole length.
If the exclusion of this information is
justified on the basis that the information
is not Material and this exclusion does
not detract from the understanding of the
report, the Competent Person should
clearly explain why this is the case.
In reporting Exploration Results,
weighting averaging techniques,
maximum and/or minimum grade
truncations (e.g. cutting of high grades)
and cut-off grades are usually Material
●
Data aggregation
methods
Type, reference name/number, location
and ownership including agreements or
material issues with third parties such as
joint ventures, partnerships, overriding
royalties, native title interests, historical
sites, wilderness or national park and
environmental settings.
The security of the tenure held at the time
of reporting along with any known
impediments to obtaining a licence to
operate in the area.
●
●
●
No data aggregation used
Metal equivalent values have not been
used.
Future Battery Minerals Ltd
info@futurebatteryminerals.com.au
Suite 10, 38 Colin St, West Perth WA 6005
+61 8 6383 7817
ABN 91 148 966 545
futurebatteryminerals.com.au
ASX: FBM
Follow Us
13
CRITERIA
EXPLANATION
●
●
Relationship
between
mineralisation
widths and
intercept lengths
●
●
●
Diagrams
Balanced
reporting
Other substantive
exploration data
Further work
●
●
●
●
●
COMMENTARY
and should be stated.
Where aggregate intercepts incorporate
short lengths of high-grade results and
longer lengths of low grade results, the
procedure used for such aggregation
should be stated and some typical
examples of such aggregations should be
shown in detail.
The assumptions used for any reporting
of metal equivalent values should be
clearly stated.
These relationships are particularly
important in the reporting of Exploration
Results.
If the geometry of the mineralisation with
respect to the drill-hole angle is known,
its nature should be reported.
If it is not known and only the dow
Share your feedback
Discover