New Prospective Gold Targets at Randalls North
Released
Released
Announcement PDF
ASX Announcement
13 January 2026
ASX: OR3
Follow Us
E. info@oreresources.com.au
P. +618 6383 7817
oreresources.com.au
ORE Resources
Suite 10, 38 Colin St, West Perth WA 6005
NEW PROSPECTIVE GOLD TARGETS AT RANDALLS NORTH
Ore Resources Ltd (ASX: OR3) (Ore or the Company) is pleased to advise that it has completed detailed litho-
structural interpretation of all geophysical data and a detailed review of all available surface geochemistry
covering the northern tenements (Randalls North) of the Randalls Gold Project (Randalls), located in the W.A.
Goldfields region of Western Australia.
HIGHLIGHTS
• Litho-structural interpretation of reprocessed aeromagnetic data in combination with surface
geochemistry at Randalls North has identified nine (9) broad gold targets at the Lone Pine Dam,
Venetian and Lake Yindarlgooda prospects.
• Litho-structural targeting was derived from prospective features in the interpreted magnetic geophysics
at Randalls North being:
o Cross cutting faults and displacements which are oblique to the NW striking lithological trend and
regional scale Randalls Fault
o Minor structures with correlation to surface elevated gold-in-soils and historic drilling intercepts
o Displacements in magnetic trends signalling potential faulting or intrusions
• At Lone Pine Dam and Venetian, multiple prospective NE-SW faults are coincident with anomalous
proximal historic drilling, suggesting historical drill holes were not adequately positioned to test these
structures.
• Many of the targets are strongly coincident with large +20ppb gold-in-soils anomalies and remain
undertested with only limited historic shallow drilling completed.
• Detailed review of the surface geochemistry identified five (5) zones of moderate-to-large gold in-soil
anomalism.
• These northern litho-structural targets are set to be prioritised, alongside the targets previously
identified at Randalls South, in Ore’s upcoming exploration work programmes at Randalls.
• Negotiations with relevant Native Title Parties underway to advance tenements to grant, along with the
scheduled commencement of initial environmental surveys.
• Ore is well funded and strongly positioned to advance all planned exploration programmes at its
Coolgardie and Randalls Gold Projects in 2026, with a pro-forma cash balance of approx. A$10.69M0F
1
.
Ore Resources’ Managing Director and CEO, Nick Rathjen, commented:
“Our exploration due diligence of the Randalls Gold Project continues to uncover significant potential for new
gold discoveries. A comprehensive review of all available magnetic geophysical data has successfully identified
9 new broad structural gold targets at Randalls North. These targets are situated within three previously
1 Pro-forma cash balance is based on the current cash position including proceeds received from completion of Tranche 1 Placement (unaudited).
oreresources.com.au 2
identified prospects at Lone Pine Dam, Venetian and Campese. In addition, 5 zones of gold-in-soil anomalism
have also been identified through a detailed review of surface geochemistry.
“Notably, it appears that multiple prospective NE-SW faults run coincident with anomalous proximal historic
drilling, suggesting that historical drill holes were not adequately aligned to test these structures. This implies
that more curated drilling may produce an immediate uplift to these already encouraging historical drill results.
“These results at Randalls North are notably comparable to the previous exploration success achieved at Randalls
South, reflective of the tenement-wide gold prospectivity waiting to be unlocked at Randalls. Upcoming
exploration works at Randalls will focus on further delineating key litho-structural targets that are both strongly
coincident with gold-in-soil anomalies as well as previously identified historical drill intercepts.
“Our planned exploration works at Randalls for 2026 will complement our primary exploration focus, which is to
be centered on our Coolgardie Gold Projects. Assay results from Phase 3 RC drilling at Miriam are expected in the
coming weeks and will be used to inform the planned execution of an expansive 30,000m drilling programme to
commence later in 2026.”
Randalls North overview
Ore previously executed two binding option agreements1F
2,
2F
3
to acquire Randalls, which consists of seven (7)
tenements (one granted EL and six (6) ELAs) overlying 697.5km2
of prospective exploration tenure in the W.A.
Goldfields. As part of its due diligence to potentially exercise these options and acquire the project, Ore
commenced a detailed review of gold prospectivity at Randalls by compiling and reviewing all available
exploration data pertaining to historical drilling, surface geochemistry and magnetic geophysics.
Ore completed the detailed review of historical exploration drilling at Randalls North in October 2025,
identifying multiple large-scale gold in regolith anomalies along the Randalls Fault, including Lone Pine Dam,
Venetian, Campese and Lake Yindarlgooda.3F
4
In collaboration with Southern Geoscience Consultants (SGC), Ore also compiled all available magnetic
geophysical data pertaining to Randalls. This data, compiled from multiple sources and reprocessed, enabled
Ore to complete its litho-structural review of Randalls North and identify the interpreted cross-cutting
mineralised structures.
New gold targets identified
Randalls North overlies an archaean mafic and sedimentary sequence of the regional-scale Randalls Fault. This
fault runs across the entire length of the tenure and is evident within the magnetic imagery (refer Figure 1).
Through its detailed review of magnetic geophysics and surface geochemistry at Randalls North, Ore has
identified 9 broad litho-structural targets along with five (5) zones of moderate-to-large scale gold-in-soil
anomalism.
These targets are located within the Lone Pine Dam, Venetian and Campese prospects. Key historical drilling
results identified at these prospects have been highly encouraging, including:
• 8m @ 3.1 g/t Au fr 4m (95LPR357) (Lone Pine Dam)
2 Refer to OR3 ASX releases dated 22 October 2025, “Option to Acquire Randalls Gold Project”
3 Refer to OR3 ASX release dated 2 December 2025, “Expansion of Randalls Gold Project”
4 Refer to OR3 ASX release dated 3 November 2025, “Large-Scale Mineralised Gold Trends Identified at Randalls Gold Project”
oreresources.com.au 3
• 12m @ 1.22 g/t Au (VRB165) (Lone Pine Dam), within 21m @ 0.80 g/t Au fr 44m
• 4m @ 2.79 g/t Au fr 28m (VNRB0040) (Venetian)
• 18m @ 1.00 g/t Au fr 31m (VRB001) (Venetian), incl. 5m @ 1.98 g/t Au fr 32m
• 2m @ 5.55 g/t Au fr 63m (CR3) (Campese)
Figure 1: Randalls North geophysical overview and key targets
Across all three prospects, anomalous drill hole results appear coincident with cross cutting northeast-
southwest (NE-SW) striking fault structures. Historical drilling was largely restricted to northeast-southwest (NE-
SW) and east-west (E-W) fencelines, orientations that are optimal to test stratigraphy parallel lodes but not the
interpreted cross-cutting mineralised structures.
oreresources.com.au 4
As a result, the historical drill holes were not positioned to achieve effective oblique intersections with the
mineralised structures interpreted by Ore, resulting in inadequate testing. Therefore, these historical drill
intercepts may represent only proximal or partial intersections of these potential gold mineralised structures.
This is particularly evident at Lone Pine Dam and Venetian, where multiple structures and faults are observed at
an oblique orientation to the stratigraphy and appear to tap the regional scale Randalls Fault.
Ore believes that the new interpretation of these prospects reveal substantial opportunity for archaean lode
gold mineralisation waiting to be unlocked with proper, curated drill testing.
The targets within the Lake Yindarlgooda Trend are not suitable for further surface geochemical testing due to
the transported nature of the overlying sediments. Ore is currently evaluating geophysical techniques to support
further detailed assessment of this prospect.
Several of the litho-structural targets identified possess coincident gold-in-soil anomalism (>20ppb Au) or are
associated with historic drilling intercepts (refer Figure 2). These targets are set to be prioritised in Ore’s
upcoming exploration work programmes at Randalls.
Figure 2: Randalls North surface geochemical results
oreresources.com.au 5
Next steps
Ore continues to advance due diligence activities at Randalls. Negotiations with relevant Native Title Parties
underway to advance tenements to grant, along with the scheduled commencement of initial environmental
surveys. To date, Ore has identified nineteen (19) litho-structural targets at Randalls, including the ten (10)
targets previously identified at Randalls South4F
5
. The Company intends to conduct further detailed assessment
of these high-potential gold targets through 2026.
All future exploration activities at Randalls in 2026 are set to complement the Company’s planned exploration
programmes at the Coolgardie Gold Projects. Comprehensive assay results from the Phase 3 RC drilling
programme at Miriam are expected in the coming weeks.5F
6
Figure 3: Regional map – Eastern W.A. Goldfields projects
5 Refer to OR3 ASX release dated 15 December 2025, “New Prospective Gold Targets Identified at Randalls South”
6 Refer to OR3 ASX release dated 1 December 2025, “Phase 3 RC Drilling Commences at Miriam”
oreresources.com.au 6
This announcement has been authorised for release by the Board of Directors of the Company.
For further information, visit http://www.oreresources.com.au/ or contact:
Nicholas Rathjen Robin Cox
CEO & Managing Director Technical Director
E: nrathjen@oreresources.com.au E: rcox@oreresources.com.au
Competent Persons Statement
The information in this announcement that relates to exploration results is based on and fairly represents information compiled
by Mr Robin Cox BSc (E.Geol), a Competent Person, who is a Member of the Australian Institute of Mining and Metallurgy.
Mr Cox is the Company’s Chief Geologist and has sufficient experience that is relevant to the style of mineralisation and type
of deposit under consideration and to the activity being undertaken to qualify as a Competent Person as defined in the 2012
Edition of the Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves. Mr Cox consents
to the inclusion in this announcement of the matters based on his information in the form and context in which it appears.
The information in this announcement that relates to Geophysical Results is based on and fairly represents information
compiled by Mr Matthew Hutchens (BSc. Hons. Geophysics) Senior Principal Geophysicist at Southern Geoscience
Consultants, a Competent Person, who is a Member of the Australian Institute of Geoscientists (AIG). Mr Hutchens is a
consultant to the company and has sufficient experience that is relevant to the style of mineralisation and type of deposit under
consideration and to the activity being undertaken to qualify as a Competent Person as defined in the 2012 Edition of the
Australasian Code for Reporting of Exploration Results, Mineral resources and Ore Reserves. Mr Hutchens consents to the
inclusion in this announcement of the matters based on his information in the form and context in which it appears.
Forward-Looking Statements
This document may include forward-looking statements. Forward-looking statements include, but are not limited to, statements
concerning Ore Resource Limited’s planned exploration programme and other statements that are not historical facts. When
used in this document, the words such as “could,” “plan,” “estimate,” “expect,” “intend,” “may”, “potential”, “should,” and similar
expressions are forward-looking statements. Although Ore Resources Limited believes that its expectations reflected in these
forward-looking statements are reasonable, such statements involve risks and uncertainties, and no assurance can be given
that actual results will be consistent with these forward-looking statements.
Previously Reported Results
The information in this announcement that relates to Exploration Results is extracted from the ASX announcements (Original
Announcements), as referenced, which are available at www.oreresources.com.au. Ore confirms that it is not aware of any
new information or data that materially affects the information included in the Original Announcements and, that all material
assumptions and technical parameters underpinning the estimates in the Original Announcements continue to apply and have
not materially changed. Ore confirms that the form and context in which the Competent Persons’ findings are presented have
not been materially modified from the original announcement.
oreresources.com.au 7
About Ore Resources Ltd (ASX:OR3)
THE BUSINESS: Gold and lithium exploration and development
Ore Resources (ASX: OR3) is an exploration and development company focused on rapidly advancing its 100%
owned Coolgardie and Randalls Gold and Lithium Projects in the Eastern Goldfields of Western Australia.
THE LOCATION: Infrastructure-rich project setting
The Eastern W.A. Goldfields is an
outstanding location in which to explore for,
build, and operate gold and lithium mines. It
is a long-established mining province with all
the accompanying benefits, including all-
year land access, skilled labour, mining
services and infrastructure.
The Projects are positioned within 50km of
the mining hub of Kalgoorlie (via sealed and
access roads), approximately 370km to the
port of Esperance and approximately 550km
to Perth via road and rail. We are proximal to
multiple gold and lithium mining and
processing operations and development
projects of substantial scale.
This available range of potential
commercialisation options, including
standalone development, positions us well
to monetise current and future success.
THE TEAM: Proven value generators
Our carefully assembled team has an extensive track record of exploration success, project stewardship,
development expertise and operating excellence that has repeatedly resulted in the delivery of substantial
shareholder value: Nick Rathjen (MD), Robin Cox (Technical Director), Nev Power (Chairman), Rob Waugh (NED).
THE CAPACITY: Balance sheet strength and runway
We are a business and team that is resolutely focussed on the stewardship of our shareholders’ capital and the
astute application of this capital for maximal return. We are well-funded to undertake our extensive planned
exploration and evaluation work programs throughout 2026 and beyond.
oreresources.com.au 8
JORC Code, 2012 Edition, Table 1
Section 1: Sampling Techniques and Data
CRITERIA EXPLANATION COMMENTARY
Sampling
techniques
• Nature and quality of sampling (eg cut
channels, random chips, or specific
specialised industry standard
measurement tools appropriate to the
minerals under investigation, such as
down hole gamma sondes, or handheld
XRF instruments, etc). These examples
should not be taken as limiting the broad
meaning of sampling.
• Include reference to measures taken to
ensure sample representivity and the
appropriate calibration of any
measurement tools or systems used.
• Aspects of the determination of
mineralisation that are Material to the
Public Report. In cases where ‘industry
standard’ work has been done this would
be relatively simple (eg ‘reverse
circulation drilling was used to obtain 1m
samples from which 3kg was pulverised
to produce a 30g charge for fire assay’).
In other cases more explanation may be
required, such as where there is coarse
gold that has inherent sampling
problems. Unusual commodities or
mineralisation types (eg submarine
nodules) may warrant disclosure of
detailed information.
• OR3 has relied upon public data collated from
previous explorers and supplied via WAMEX
all relevant A Number reports and operator
have been listed.
• Samples were collected with hand tools,
removing the top 10-20cm of soil in order to
remove organic matter, before digging a
further 10cm of soil for sieving.
• Approximately 200g of sieved soil was
collected at each site, utilising a minimum –
0.18mm mesh.
• Rock chip samples are opportunistic grab
samples taken from outcrop and subcrop and
grab, collecting a 0.5-3kg sample for whole
rock analysis.
Drilling
techniques
• Drill type (eg core, reverse circulation,
open-hole hammer, rotary air blast,
auger, Bangka, sonic, etc) and details
(eg core diameter, triple or standard
tube, depth of diamond tails, face-
sampling bit or other type, whether core
is oriented and if so, by what method,
etc).
• No drilling results reported
Drill sample
recovery
• Method of recording and assessing core
and chip sample recoveries and results
assessed.
• Measures taken to maximise sample
recovery and ensure representative
nature of the samples.
• Whether a relationship exists between
sample recovery and grade and
whether sample bias may have
occurred due to preferential loss/gain of
fine/coarse material.
• No drilling results reported.
Logging • Whether core and chip samples have
been geologically and geotechnically
logged to a level of detail to support
appropriate Mineral Resource
estimation, mining studies and
metallurgical studies.
• Results reported are historic and ORE has
relied upon public domain data reported by
previous project holders.
• Rock chip sampling has basic lithology
descriptions.
oreresources.com.au 9
• Whether logging is qualitative or
quantitative in nature. Core (or costean,
channel, etc) photography.
• The total length and percentage of the
relevant intersections logged.
Sub-sampling
techniques and
sample
preparation
• If core, whether cut or sawn and
whether quarter, half or all core taken.
• If non-core, whether riffled, tube
sampled, rotary split, etc and whether
sampled wet or dry.
• For all sample types, the nature, quality
and appropriateness of the sample
preparation technique
• Quality control procedures adopted for
all sub-sampling stages to maximise
representivity of samples.
• Measures taken to ensure that the
sampling is representative of the in-situ
material collected, including for instance
results for field duplicate/second-half
sampling.
• Whether sample sizes are appropriate
to the grain size of the material being
sampled.
• Soil samples are sieved to remove coarse
particulars and organic matter, in order to
collect fine clays, silts and sands which form
the part of the soil profile.
Quality of assay
data and
laboratory tests
• The nature, quality and appropriateness
of the assaying and laboratory
procedures used and whether the
technique is considered partial or total.
• For geophysical tools, spectrometers,
handheld XRF instruments, etc, the
parameters used in determining the
analysis including instrument make and
model, reading times, calibrations
factors applied and their derivation, etc.
• Nature of quality control procedures
adopted (eg standards, blanks,
duplicates, external laboratory checks)
and whether acceptable levels of
accuracy (i.e. lack of bias) and precision
have been established.
The Historic data represented in this
announcement was culminated from the
exploration work conducted by the following
parties.
• Mount Monger Gold Project, A no. 61543,
Fire Assay AAS for Au, ICPOES for all other
elements. ALS Laboratory.
• Silverlake Resource, A no. 97728, Fire
Assay AAS and Aqua Regia digest methods
at Genalysis Laboratory Perth lab codes,
B_AAS, B_OES, B_ETA, B_SAAS,
B5_SAAS, B5_AAS
• Placer Dome, A no. 66730, Fire Assay AAS,
ALS laboratories
• Heron Resources, A no. 86402 Aqua Regia
with AAS at Genalysis Laboratories and Fire
Assay with AAS finish at ALS laboratories.
• Riversgold, A no. 115198, Aqua Regia
Digest with ICP-MS finish, at Intertek
laboratories, lab code AR_ICPMS, Photon
assay at Minanalytical, and Fire Assay at
Nagrom.
Verification of
sampling and
assaying
• The verification of significant
intersections by either independent or
alternative company personnel.
• The use of twinned holes.
• Documentation of primary data, data
entry procedures, data verification, data
storage (physical and electronic)
protocols.
• Discuss any adjustment to assay data.
• No independent verification has been
conducted
• Field data is imported to the ORE
geochemistry database.
• No adjustments are made to assay data
Location of data
points
• Accuracy and quality of surveys used to
locate drill holes (collar and down-hole
surveys), trenches, mine workings and
other locations used in Mineral
Resource estimation.
• Drill Holes were located utilising a hand held
GPS with a accuracy +/-5m and via local
gridding with later transformation of local grid
values.
oreresources.com.au 10
• Specification of the grid system used.
• Quality and adequacy of topographic
control.
• All samples information has been transformed
to UTM MGA 94 Zone 51
• Geospatial grid information is represented in
UTM MGA 94 Zone 51
Data spacing
and distribution
• Data spacing for reporting of
Exploration Results.
• Whether the data spacing and
distribution is sufficient to establish the
degree of geological and grade
continuity appropriate for the Mineral
Resource and Ore Reserve estimation
procedure(s) and classifications
applied.
• Whether sample compositing has been
applied.
• Hole spacing ranges from 80 - 200m on drill
lines ranging from 80-500m.
• This data spacing and nature of regional
exploration drilling is appropriate for
identifying continuous and non-continuous
geochemical anomalies. Further exploration
will refine larger anomalies.
Orientation of
data in relation
to geological
structure
• Whether the orientation of sampling
achieves unbiased sampling of possible
structures and the extent to which this is
known, considering the deposit type.
• If the relationship between the drilling
orientation and the orientation of key
mineralised structures is considered to
have introduced a sampling bias, this
should be assessed and reported if
material.
• Drilling has mostly been conducted on E/W
and NE/SW grid lines. Geological units in the
region have a dominantly N-S to NW-SE
strike. As such the NE/SW and E-W drilling
provides relative oblique interceptions.
Sample security • The measures taken to ensure sample
security.
• Results reported are historic and FBM has
relied upon public domain data reported by
previous project holders.
• FBM has not located historic data relating to
sample security
Audits or
reviews
• The results of any audits or reviews of
sampling techniques and data.
No independent audit or review has been
undertaken.
Section 2: Reporting of Exploration Results
CRITERIA EXPLANATION COMMENTARY
Mineral tenement
and land tenure
status
• Type, reference name/number, location
and ownership including agreements or
material issues with third parties such
as joint ventures, partnerships,
overriding royalties, native title
interests, historical sites, wilderness or
national park and environmental
settings.
• The security of the tenure held at the
time of reporting along with any known
impediments to obtaining a licence to
operate in the area.
The Randalls Project consists of 7
Exploration leases.
• Granted leases are E 25/596, and ELA’s
are E25/649, E25/654, E25/670, E25/671,
E25/660 and E28/3567.
• ORE holds a six month option agreement
over the tenements which are currently held
by Miramar Resources, upon exercise of
the option agreement the project will be
transferred 100% to ORE’s elected
subsidiary.
• ORE holds a 12 month option over E25/660
with Wilding, upon exercise of the option
agreement the project will be transferred
100% to ORE’s elected subsidiary.
• Upon exercise of the option agreement with
Miramar Resources Ltd, Miramar will retain
a 1% NSR over E25/596, and ELA’s are
E25/649, E25/654, E25/670, E25/670 and
E28/3567.
• Tenements E25/596 and E25/660
encroaches the Randalls Timber Reserve,
exploration within the reserve will require
oreresources.com.au 11
an approved Reserve Activity Management
Plan.
• Tenements which are in application require
a Heritage Protection Agreement with the
relevant Native Title Party before they can
be progressed to grant. ORE has
commenced negotiations regarding a HPA
with all relevant NTP’s.
• The tenements are in good standing and no
other known impediments exist.
Exploration done
by other parties
Acknowledgment and appraisal of
exploration by other parties.
The Historic data represented in this
announcement was culminated from the
exploration work conducted by the following
parties.
• Mount Monger Gold Project, A no. 61543,
Fire Assay AAS for Au, ICPOES for all other
elements. ALS Laboratory.
• Silverlake Resource, A no. 97728, Fire
Assay AAS and Aqua Regia digest methods
at Genalysis Laboratory Perth lab codes,
B_AAS, B_OES, B_ETA, B_SAAS,
B5_SAAS, B5_AAS
• Placer Dome, A no. 66730, Fire Assay AAS,
ALS laboratories
• Heron Resources, A no. 86402 Aqua Regia
with AAS at Genalysis Laboratories and Fire
Assay with AAS finish at ALS laboratories.
• Riversgold, A no. 115198, Aqua Regia Digest
with ICP-MS finish, at Intertek laboratories,
lab code AR_ICPMS, Photon assay at
Minanalytical, and Fire Assay at Nagrom.
Geology Deposit type, geological setting and style of
mineralisation.
• The Randalls project is prospective for oxide,
lode and structurally hosted gold
mineralisation hosted within Archean aged
greenstone lithologies. The project is also
prospective for Lithium, Caesium, Tantalum
(LCT) enriched pegmatites which intrudes
older Archean aged greenstone lithologies.
Drill hole
Information
• A summary of all information material
to the understanding of the
exploration results including a
tabulation of the following information
for all Material drill holes:
• easting and northing of the drill hole
collar
• elevation or RL (Reduced Level –
elevation above sea level in metres)
of the drill hole collar
• dip and azimuth of the hole
• down hole length and interception
depth
• hole length.
• If the exclusion of this information is
justified on the basis that the
information is not Material and this
exclusion does not detract from the
understanding of the report, the
Competent Person should clearly
explain why this is the case.
• Sample location data has been represented in
maps and tables. (Table 2).
• Maximum Au assay has been represented in
the maps.
oreresources.com.au 12
Data aggregation
methods
• In reporting Exploration Results,
weighting averaging techniques,
maximum and/or minimum grade
truncations (eg cutting of high grades)
and cut-off grades are usually
Material and should be stated.
• Where aggregate intercepts
incorporate short lengths of high-
grade results and longer lengths of
low-grade results, the procedure used
for such aggregation should be stated
and some typical examples of such
aggregations should be shown in
detail.
• The assumptions used for any
reporting of metal equivalent values
should be clearly stated.
• Surface sample results have been
categorized in various cut off regimes. 0-
5ppb, 5-10ppb, 10-20ppb, >50ppb
Relationship
between
mineralisation
widths and
intercept
lengths
• These relationships are particularly
important in the reporting of Exploration
Results.
• If the geometry of the mineralisation
with respect to the drill hole angle is
known, its nature should be reported.
• If it is not known and only the down
hole lengths are reported, there should
be a clear statement to this effect (eg
‘down hole length, true width not
known’).
• No drill holes reported
Diagrams Appropriate maps and sections (with
scales) and tabulations of intercepts should
be included for any significant discovery
being reported These should include, but
not be limited to a plan view of drill hole
collar locations and appropriate sectional
views.
Relevant diagrams have been included within
the announcement.
Balanced
reporting
Where comprehensive reporting of all
Exploration Results is not practicable,
representative reporting of both low and
high grades and/or widths should be
practiced to avoid misleading reporting of
Exploration Results.
• Assay data has been surface samples in the
project tenure. .
Other
substantive
exploration data
Other exploration data, if meaningful and
material, should be reported including (but
not limited to): geological observations;
geophysical survey results; geochemical
survey results; bulk samples – size and
method of treatment; metallurgical test
results; bulk density, groundwater,
geotechnical and rock characteristics;
potential deleterious or contaminating
substances.
Airborne geophysical data acquired by previous
explorers using fixed wing aircraft and satellite
based (GPS) data location and magnetic
sampling rate of 10m or less including the
following surveys:
• Roe Hills magnetic and radiometric survey
flown by TAG in 1996 for WMC Resources
Ltd on 40m spaced eastnortheast-
westsouthwest lines at a ground clearance of
30m
• Jubilee 105-4 magnetic survey flown by UTS
Geophysics in 1996 for Fodina Minerals Pty
Ltd on 50m spaced southwest-northeast lines
at a ground clearance of 25m
• Belches magnetic survey flown by UTS
Geophysics in 1996 for Mt Monger Gold Pty
Ltd on 50m spaced east-west lines at a
ground clearance of 25m
• Mt Monger Randalls magnetic radiometric and
elevation survey flown by UTS Geophysics in
2001 for Goldfields Exploration on 50m
oreresources.com.au 13
spaced east-west lines at a ground clearance
of 20m
• Olly Dam magnetic radiometric and elevation
survey flown by UTS Geophysics in 2004 for
Glintan Pty Ltd on 50m spaced northeast-
southwest lines at a ground clearance of 25m
• Widgiemooltha North magnetic radiometric
and elevation survey flown by UTS
Geophysics in 2014 for Geological Survey of
Western Australia on 100m spaced east-west
lines at a ground clearance of 50m
• Kurnalpi North magnetic radiometric and
elevation survey flown by Thomson Aviation
in 2014 for Geological Survey of Western
Australia on 100m spaced east-west
Share your feedback
Discover